Home   Search for Products   Where to Buy   Facts   Testimonials   FAQ's   News & Events   Contact K&N
K&N Filters

K&N Marine Flame Arrestors
& Accessories
for Boat Applications


Due to the differences in engine compartment designs, and accessories supplied by those manufactures, clearances may vary from boat to boat. The applications listed in this brochure are to be used as a reference guide only. Make sure to double check all the measurements before ordering by using the checklist below. If you wish to increase or decrease the size of the filter, see Universal 3-Piece assemblies below.  (#59-1195 shown in picture)

K&N Flame Arrestor 59-1195

Indmar

Engine & Fuel System Size Total Ht Element Ht Part # Footnotes
5.7L LS-1 Corvette MPI 5.7L V8 N/A N/A N/A  
5.7L Hammerhead 2 bbl 5.7L V8 N/A N/A N/A  
5.7L Monsoon EFI 5.7L V8 N/A N/A N/A  
5.7L Malibu Vortec 4 bbl 5.7L V8 3.75" 2" 59-3264 1
5.7l Vortec Carb 4 bbl 5.7L V8 3.75" 2" 59-3264 1
5.7L Vortec PFI 5.7L V8 N/A N/A N/A  
5.7L Vortec TBI 5.7L V8 3.75" 2" 59-3264 1,3
7.4L 4 bbl 7.4L V8 3.75" 2" 59-3264 1
7.4L MPI 7.4L V8 N/A N/A 59-5020  
8.1L 4 bbl 8.1L V8 4.50" 2.75" 59-3364 1,2
8.1L PFI 8.1L V8 N/A N/A 59-5020  

Mercury

Engine & Fuel System Size Total Ht Element Ht Part # Footnotes
3.0L 2 bbl* 3.0L L4 3.75" 2" 59-3264 1
4.3L 2 bbl* 4.3L V6 3.75" 2" 59-3264 1
4.3LH 4 bbl 4.3L V6 3.75" 2" 59-3264 1
4.3L EFI TBI 4.3L V6 3.75" 2" 59-3264 1,3
5.0L 2 bbl* 5.0L V8 4.50" 2.75" 59-3364 1,2
5.0L EFI TBI 5.0L V8 4.50" 2.75" 59-3364 1,2,4
5.7L 2 bbl* 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L SKI 2 bbl* 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L EFI TBI 5.7L V8 4.50" 2.75" 59-3364 1,2,4
Early 4.3., 5.0, 5.7 MPI All       7
Late 4.3., 5.0, 5.7 MPI
All       8
98-00 Mercruiser 7.4L V8 6.625" 6" 59-5004  
Early Mercruiser MPI 3V Pulley 454 MAG 4.375" 4" 59-4541 5
Early Mercruiser MPI 3V Pulley 502 MAG 4.375" 4" 59-4541 5
Late MPI Serpentine Belt 454 MAG 4.375" 4" 59-4542 6
Late MPI Serpentine Belt 502 MAG 4.375" 4" 59-4542 6
496 MPI 8.1L V8 4.375" 4" 59-5005  
496 HO & Mag MPI 8.1L V8 4.375" 4" 59-5005  
HP 500 4 bbl 8.2L V8 6.75" 5" 59-3370 1,2
HP 500 MPI 8.2L V8 4.375" 4" 59-5020  
Early 6.2 MX MPI 6.2L V8       7
Late 6.2 MX MPI 6.2L V8       8

Volvo Penta

Engine & Fuel System Size Total Ht Element Ht Part # Footnotes
SX SERIES
3.0 GS 2 bbl* 3.0L L4 3.75" 2" 59-3264 1
4.3GL 2 bbl* 4.3L V6 3.75" 2" 59-3264 1
4.3L Gi EFI-TBI 4.3L V6 3.75" 2" 59-3264 1,3
5.0GL 2 bbl* 5.0L V8 4.50" 2.75" 59-3364 1,2
5.0L Gi EFI-TBI 5.0L V8 4.50" 2.75" 59-3364 1,2,4
5.7 GS 2 bbl* 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L Gsi EFI-TBI 5.7L V8 4.50" 2.75" 59-3364 1,2,4
7.4 Gi MPI 7.4L V8 4.50" 2.75" 59-3364 1,2,4
DUOPROP SERIES
4.3GL 2 bbl* 4.3L V6 3.75" 2" 59-3264 1
4.3L Gi EFI-TBI 4.3L V6 3.75" 2" 59-3264 1,4
5.0GL 2 bbl* 5.0L V8 4.50" 2.75" 59-3364 1,2
5.0L Gi EFI-TBI 5.0L V8 4.50" 2.75" 59-3364 1,2,4
5.7 GS 2 bbl 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L Gsi EFI-TBI 5.7L V8 4.50" 2.75" 59-3364 1,2,4
7.4 Gi EFI-MPI 7.4L V8 4.50" 2.75" 59-3364 1,2,4
7.4 Gsi EFI-MPI 7.4L V8 4.50" 2.75" 59-3364 1,2,4
8.1L MPI EFI-MPI 8.1L V8 4.50" 2.75" 59-3364 1,2,4
HIGH-END SERIES
DPX 385 EFI-MPI 7.4L/454 4.50" 2.75" 59-3364 1,2,4
DPX 415 EFI-MPI 8.2L/502 4.50" 2.75" 59-3364 1,2,4
DPX 500 EFI-MPI 8.2L/502 4.50" 2.75" 59-3364 1,2,4
DPX 600 EFI-MPI 8.8L/540 4.50" 2.75" 59-3364 1,2,4
INBOARD SERIES
7.4Gi EFI-MPI 7.4L/454 4.50" 2.75" 59-3364 1,2,4
PLATINUM SERIES
7.4Gi EFI-MPI 7.4L/454 4.50" 2.75" 59-3364 1,2,4

IMPORTANT: DID YOU CHECK THE FOLLOWING?

1.  Diameter clearance around the existing flame arrestor. Can the flame arrestor diameter be increased? 
2.  Height restriction, due to hatch clearance or any other obstruction. Can the flame arrestor’s height be increased? 
3.  Do any vent lines connected to existing flame arrestor. If there are vent lines attached, measure inside diameter of vent line and order appropriate vent hose kit below. 
4.  For multiple carburetor application, check center to center measurements ensuring enough space for two flame arrestors.
5.  Check diameter of carburetor.
  
Footnotes for above applications: 1) May increase size as needed  2) May decrease size as needed  3) Use Z-stud Part #08008  4) Use Z-stud Part #08009  5) Kit includes adapter Part # 85-8837 and flame arrestor Part # 59-5005  6) Kit includes adapter Part # 85-8837 and flame arrestor Part # 59-5006  7) Single Stud, 3-7/8" throttle body  8) 3 Studs, 3-5/8" throttle body

* Fits Holley 2 bbl. For Rochester 2 bbl. (3/16" Neck Flange) use Part #59-3262 or #59-3362.

Universal 3-Piece Filter Assembly

 
K&N Universal 3-Piece Filter Assembly 59-5004 on Mercruiser 7.4L K&N Universal 3-Piece Filter Assembly 59-3364 K&N Universal 3-Piece Filter Assembly 59-5005 on Mercruiser 496 HO
#59-5004 on 98-00 Mercruiser 7.4L #59-3364 on Carb Application #59-5005 on Mercruiser 496 HO
K&N Universal 3-Piece Filter Assembly 59-5020 on Mercruiser HP 500 K&N Vent Hose Adapter on 3 Piece Assembly K&N Universal 3-Piece Filter Assembly 59-4541 on Mercruiser 454/502 Magnum
#59-5020 on Mercruiser HP 500 Vent Hose Adapter on 3 Piece Assembly #59-4541 on Mercruiser 454/502 Magnum 
Outside Diameter Flange Diameter Element Height Total Height Velocity Stack Part #
14" 5-1/8" 2.25" 3.87" No 59-3214
14" 5-1/8" 3.0" 4.62" No 59-3314
14" 5-1/8" 4.0" 5.62" No 59-3414
9" 5-1/8" 2.75" 4.5" No 59-3364
9" 5-1/8" 2.0" 3.75" No 59-3264
9" 5-1/8" 5.0" 6.75" No 59-3370
9" 5-1/8" 2.75" 8.5" Yes 59-1195
9" 5-1/8" 5.0" 10.75" Yes 59-1196
9" 4-7/32" 2.75" 4.5" No 59-3368
9" 3-1/16" 2.0" 3.75" No 59-3262
9" 3-1/16" 2.75" 4.5" No 59-3362
9" 2-5/8" 2.75" 4.5" No 59-3360
9" 7-5/16" 5.0" 10.75" Yes 59-1198
9" 7-5/16" 2.75" 4.5" No 59-0284
9" 7-5/16" 2.75" 8.5" Yes 59-3366
9" 7-5/16" 5.0" 6.75" No 59-1197

Marine Vent Hose Adapters   (Trimming for correct height may be required)

Size Height Part #
1/4" 2.75" 85-1325
1/4" 4" 85-1425
1/4" 6" 85-1625
3/8" 2.75" 85-1337
3/8" 4" 85-1437

Size Height Part #
3/8" 6" 85-1637
1/2" 2.75" 85-1350
1/2" 4" 85-1450
1/2" 6" 85-1650
5/8" 2.75" 85-1362

Size Height Part #
5/8" 4" 85-1462
5/8" 6" 85-1662
3/4" 2.75" 85-1375
3/4" 4" 85-1475
3/4" 6" 85-1675

Clamp-Ons

        Marine Clamp-On Filters

Type Flange Length Width Height Notes Part #
Oval 2.93"x4.75" 6.5" 4.75" 5.62" GM TPI 59-5000
Oval 2.93"x4.75" 8.62" 4.5" 3.18" GM LT-1 No Vent 59-5020
Oval 2.93"x4.75" 8.62" 4.5" 3.18" GM LT 5/8" Vents(2) 59-5021
Oval 2.93"x4.75" 8.62" 4.5" 3.18" GM LT-1 5/8" Vent 59-5019
Oval 2.93"x4.75" 8.62" 5.25" 5.5" GM 454 TPI 59-5050
Oval 3.44"x5.44" 8.5" 5.06" 5"   59-5007
Rnd 3.75" 9.5"x4.625"B 8.5"x3.75"T 4" 454/502 MAG 59-5005
Rnd 3.75" 9.5"x4.625"B 8.5"x3.75"T 4" 454/502 MAG 1/2" Vent 59-5006
Rnd 3.5" 5" 4.5"x3.25" 5"   59-5003
Rnd 3.625" 5.75" 3" 6"   59-5004
Rnd 3.625" 5.75" 3" 6" 96-97 GM 2) 3/4" Vents 59-5001
Rnd 3.75" 9.31" 4.5" 3" 96-97 GM (2) 5/8" Vents 59-5022
Rnd 3.75" 9.31" 4.5" 3" 96-97 GM (2) 3/4" Vents 59-5023
Rnd 3.75" 9.31" 4.5" 3" 96-97 GM 59-5030
Rnd 3.75" 9.31" 4.5" 3" 96-97 GM 5/8" Vent 59-5010
Rnd 3.75" 5.25" 3" 6"   59-2030
Rnd 4" 5.38" 4.5x3.25" 5"   59-5002





Round Clamp-On Flame Arrester
 
© K&N Engineering, Inc. All Rights Reserved.