|
TOWER BASE COVERED CRANKCASE VENT FILTER
WITH MULTI-HOSE VENTS
High Performance Racing Style - Designed for big bore and full race VW and other like-size engines needing maximum crankcase breathing filtration. Tower design saves blow-by oil while relieving crankcase pressure. High capacity filter element stops dirt from reaching oil supply when decelerating. When installing, bottom fitting should connect to engine's lowest pressure point (such as a rocker cover). Top side fitting should connect to engine's highest pressure point (such as the crankcase).
Two Styles:
CAST ALUMINUM TOWER has a universal mount, internal oil baffles and three 3/8" NPT
outlets for braided hose fittings.
STEEL TOWER has a chrome finish and no inner baffles. Features an adjustable steel mounting bracket and three 1/2" vent tubes for use with rubber slip-on hose. |
Tower Tower Number of Cover Diameter Element Diameter Replacement Complete
Style Dimensions Outlets & Height & Height Element Part # Assembly Part #
Cast Alum. 2 1/8"Dx 3 — 3/8" NPT 4"OD x 3 1/2"H 3 1/2" x 3 1/2" RE-0280 62-1400
Chromed Steel 2"Dx4"H 3 —1/2" hose 4"OD x 3 1/2"H 3 1/2" x 3 1/2" RE-0280 62-1210
FLAT BASE COVERED CRANKCASE VENT FILTERS
Remote Mount
Designed for stock VW and other small displacement racing engines. Remote mount allows use of 1/2" or 3/8" ID vent hoses. Comes with satin anodized aluminum cover 4" in diameter and 3 1/2" high. Element is removable for easy servicing. Mounting bracket included — universal type for bolt-on or weld-on.
|
|
Number Of Cover Diameter Element Diameter Replacement Complete
Outlets & Height & Height Element Part # Assembly Part #
2 1/2" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2" E-3050 62-1180
3 1/2" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2" E-3050 62-1190
3 3/8" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2" E-3050 62-1200
|
RUBBER MOUNTING FLANGED COVERED AIR FILTERS
Ideal for air compressors, construction and farming equipment, fork lifts, stationary power plants, etc. Designed for round intake flanges. Easy to install. Rubber flange design grips securely. The flange can be stretched to fit in between sizes. Aluminum cover is anodized for durability.
|
|
RUBBER Mounting BONNET Element Diameter
Flange I.D. Diameter & Height K&N ELEMENT Part # ASSEMBLY Part #
1" 4" 3 1/2" x 3 1/2" RE-0200 54-1010
1 1/4" 4" 3 1/2" x 3 1/2" RE-0220 54-1020
1 1/2" 4" 3 1/2" x 3 1/2" RE-0240 54-1030
1 3/4" 4" 3 1/2" x 3 1/2" RE-0260 54-1040
2" 4" 3 1/2" x 3 1/2" RE-0280 54-1050
2 1/2" 5" 5" x 2 3/4" RE-0380 54-1110
|
PUSH-IN CRANKCASE VENT FILTER
Universal "Push-In" for all valve covers with 1 1/4" hole. Note: Not recommended to be used as the oil filler plug, as repeated removal will damage the filter.
|
|
FORD SCREW IN BREATHER
This filter is designed to screw directly into threaded Ford valve covers. Filter dimensions: 3" O.D. Chrome top; 1-3/4" height; Flange dimension: 1-1/4" O.D., 3/4" L
|
|
|
|
|
Vent Filter Size Part #
3"O.D.; 2-1/2"H 62-1516
with shield
3"O.D.; 2-1/2"H 62-1490
without shield
2"O.D.; 2-1/4"H 62-1485
without shield
|
|
Description Part #
Ford Screw In Breather 62-1495
|
|
NYLON REINFORCED VALVE COVER ADAPTERS WITH FILTER
Nylon reinforced adapter plus a 3" O.D. x 2-1/2" tall filter, with or without deflector shield. Universal mount, requires a 1-1/4" I.D. hole, and a 2" square, flat surface. Comes complete with mounting hardware. |
|
NYLON REINFORCED VALVE COVER ADAPTERS
Requires a 1-1/2" I.D. (flanged filter to be purchased separately) |
|
|
|
|
Description Part #
Without deflector shield 85-1221
With deflector shield 85-1222
|
|
Description Part #
Screws into Ford valve covers 85-1200
Screws into late GM valve covers 85-1210
Universal mount
(see style 4 above) 85-1220
|
|
